De Havilland Canada
DHC-2T Turbo Beaver

A turbine powered derivative of the successful and long-serving Beaver STOL utility aircraft.

De Havilland Canada DHC-2T Turbo Beaver N1459T De Havilland Canada DHC-2T Turbo Beaver N1459T at Lake Hood Airstrip, Anchorage, Alaska in May 1983.
 
The De Havilland Aircraft Company of Canada DHC-2T Turbo Beaver (or DHC-2 Mk III) is a high wing, turboprop-powered variant of the DHC-2 Beaver, a rugged, short take-off and landing utility aircraft.
 
The prototype (CF-PSM-X) was flown for the first time on 30th December 1963.
 
A total of 60 new aircraft were built by De Havilland Aircraft Company of Canada at Downsview facility, near Toronto and subsequently, there have been a number of aftermarket conversions. These featured powerplants ranging from the Pratt & Whitney Wasp Junior radial to the PT6A turboprop. Featured below is one such example (VH-AAX) having been converted in Australia fitted with a Garrett Airesearch TPE-331-61 engine. This type is informally known locally as the DHC-2/A1 Wallaroo.
 
Factory-built aircraft have a 28-inch plug in the fuselage, an angular and taller slightly swept vertical fin and, like the original, can operate on wheel, floats, skis and amphibious floats.
 
Viking Air have now acquired the design rights and are marketing a version powered by a 680hp Pratt & Whitney PT6A-27 engine and 6,000lb maximum weight. At this weight, the maximum cargo load is increased to 2,450lb.
 
Viking say that in landplane form, the Turbo Beaver operates from unsurfaced ground strips or forest clearings of three hundred metres (1,000 feet) in length. With fuel reserves, operating under Visual Flight Rules (VFR), it carries a load of about half a ton on practical stages for nearly 1,000 kilometres (about 600 statute miles). A cabin extension, providing for extra windows, a large baggage door and a cargo net, is also available. Viking has completed more than 30 Turbo Beaver conversions.
 
De Havilland Canada DHC-2/A1 'Wallaroo' VH-AAX De Havilland Canada DHC-2/A1 'Wallaroo' VH-AAX is a one-off Australian Turbo Beaver conversion used for parachute jumping at Picton, NSW.
 

Specification


Powerplant One 578shp Pratt & Whitney PT6A-6 turboprop or 550hp PT6A-20
Span 48 ft 0 in
Maximum Weight 5,100 lb
Capacity  Two crew and up to 9 passengers or freight
Maximum speed 170 mph
Cruise Speed 151 mph
Range 200 miles with 1,850lb payload; 600 miles with 1,210lb payload

 

Number built and Survivors


A total of 60 new-build aircraft by De Havilland Canada, plus aftermarket conversions, including at least 30 by Viking Air.
 

Nine aircraft are registered as DHC-2 Beaver Mk 3 on the current FAA register, with a further 31 on the Canadian register.